The Cisco Aironet® 1400 Series 5.8 Ghz 802.11a Wireless Bridge creates a new benchmark for wireless bridging by providing a high-performance and feature-rich solution for connecting multiple LANs in a metro area. Building a metropolitan area wireless infrastructure with the Cisco Aironet 1400 Series Wireless Bridge provides deployment personnel with a flexible, easy to use solution that meets the security requirements of wide area networking professionals. Designed to be a cost-effective alternative to leased lines, it is engineered specifically for harsh outdoor environments. The Cisco Aironet 1400 Series Wireless Bridge is the premier high-speed, high-performance outdoor bridging solution for line-of-sight applications, providing features such as:- N-Type connector for high gain external 5.8 Ghz antennas
- Support for both point-to-point or point-to-multipoint configurations
- Data rates of 54 Mbps can be enabled for point-to-point links up to 8.5 miles, and for point-to-multipoint links up to 2.75 miles. Aggregate throughput can be obtained in excess of 28 Mbps. Also, by using higher gain antennas or lower data rates, ranges in excess of 20 miles point-to-point can be covered. )
- Enhanced security mechanisms based on 802.11 standards
- Ruggedized enclosure optimized for harsh outdoor environments with extended operating temperature range
- Integrated or optional external Antennas for flexibility in deployment
- Designed specifically for ease-of-installation and operation
 | Product Specifications | | Frequency Range: | 5725 - 5825 GHz | | RF Connector: | Integrated Antenna | | Radio Power (max): | 250 mW | | Enclosure: | Aluminum | | Application: | Outdoor point to point, Point to multipoint, ISP backhaul | | Antenna Type: | 5.8 Ghz (Ordered Seperately) | | Data Rate: | 54 to 1 Mbps | | Receiver Sensitivity: | -70 ro -83 dbm | | Mount Method: | Pillar, Mast, Pole Mount | | Dimensions: | 11.4in x 11.4in x 4.2in | | Configuration: | Telnet, HTTP, FTP, Trivial FTP (TFTP), SNMP, console port | | Antenna Alignment: | The Cisco Aironet 1400 Series Wireless Bridge provides an auto-configuration and installation mode for out of the box deployment of point to point links without the need for a configuration via telnet, File Transfer Protocol (FTP), or SNMP. This mode drives LEDs and a Received Signal Strength Indicator (RSSI) port with a voltage output proportional to received signal strength for use in the installation and alignment process. This frees up the installers to perform their installation process and verify the link quality without requiring Cisco IOS Software or data networking knowledge. | | Standards: | 802.11a, 802.3 | | Modulation: | - BPSK @ 6 and 9 Mbps
- QPSK @ 12 and 18 Mbps
- 16-QAM @ 24 and 36 Mbps
- 64-QAM @ 48 and 54 Mbps | | Operating Modes: | Root Bridge, Non-Root Bridge | | Weatherproof: | Ruggedized, Weatherproof, Outdoor | | Security: | The Cisco Aironet 1400 Series software builds on the feature-rich, customer-driven Cisco Aironet software and the Cisco Wireless Security Suite, including 802.1X support with mutual authentication and dynamic encryption keys with TKIP; management through SNMP, Telnet, and Web browsers. | | POE: | The Power Injector LR converts the standard 10/100 baseT Ethernet category 5 RJ-45 interface that is suitable for weather-protected areas to a dual F-Type connector interface for dual coax cables that are more suitable for harsh outdoor environments. While providing a 100baseT interface to the Cisco Aironet 1400 Series, the Power Injector LR also provides power to the unit over the same cables with a power discovery feature that protects other appliances from damage should they accidentally be connected. As an added benefit to the installer, Auto MDIX is built in, allowing the dual cables to be swapped and while maintaining the same functionality. To support longer cable runs from your infrastructure network switch or router, the Power Injector LR is designed to accommodate 100 m coaxial cable run plus 100 m of indoor cat5 cable, to enable total cable runs up to 200 meters. Lightning and surge protection is also included at the F-Type connector interface to provide added protection to your network infrastructure devices. | | Network Connector: | 2 x Coax F-type | | freq_tag: | 5.8 GHz | | wifi_prot_tag: | 802.11a | | series_tag: | Aironet 1400 Series |
|
 
- Price: $3,415.92
- Mfg Part #: AIR-BR1410A-A-K9-N
- WM Part #: 100497
- Mfg: Cisco
- Info:
 Manual Datasheet - Usually ships in: 3 Days
|
