Check items to add to the cart or select all
You're currently on:
Radwin RW-2050-0150 Radwin 2000 Quad-Band 100Mbps MIMO ODU, Integrated Antenna, End
Product Description
RADWIN 2000 Radio Series Carrier-Class, High-Capacity Sub-6GHz Backhaul Solutions The RADWIN 2000 Radio Series delivers high capacity, extended range and carrier-class performance for IP and TDM networks. RADWIN 2000 provides native TDM and Ethernet over a single wireless link and incorporates advanced MIMO and OFDM technologies. The flexible multi-band radio delivers 2.3 2.4GHz and 4.9 5.9GHz frequencies on a single platform. RADWIN 2000 is the solution of choice for carriers looking for affordable backhaul solutions. With ever increasing demand for broadband services, carriers require high-capacity, cost-effective backhaul solutions. RADWIN 2000 enables carriers to accommodate capacity growth and maintain profitability through unparalleled price and excellent performance. The high-capacity radio system provides 100 Mbps net throughput (50 Mbps full duplex), with a flexible combination of Ethernet and up to 16 E1/T1 interfaces and a range of up to 120 km/75 miles.
To deliver optimal performance and unmatched robustness in all environments, RADWIN 2000 deploys advanced MIMO and OFDM technologies, ogether with built-in Diversity and RADWINs proprietary air interface, built to deliver native TDM and high-quality Ethernet in sub-6GHz bands. The flexible multi-band radio supports multiple frequency bands over a single platform, granting utmost field flexibility and simple stock management.
Radwin 2000 Unique Technology Multiple Point to Point: High Capacity Multiple Locations RADWIN's breakthrough WinLink 1000 Multiple Point-to-Point architecture allows service providers and ISPs to provide multiple end-users with carrier class services (TDM and/or Ethernet) and dedicated bandwidth from one Hub site. The Hub site includes RADWIN's unique Hub Site Synchronization (HSS) technology which synchronizes the transmission of up to 10 collocated WinLink 1000 radios - thus eliminating mutual interference commonly experienced with collocated TDD radios. It also includes RADWIN's Base Distribution Unit (BDU), a single indoor device that connects up to 8 collocated radios, while providing uplink traffic aggregation (TDM and/or Ethernet) and full layer-2 switching capabilities. 
- Deliver dedicated bandwidth per each end-user
- No degradation in network performance as more users join the network
- Directional antennas less vulnerable to interferences
- Provide combination of TDM + Ethernet services
- Low entry costs; Scalability in network growth
- Easy planning no need for radio planning
MIMO Technology Increased range and reliability:
- The Ethernet data stream is split into two lower rate chains.
- These chains can be transmitted in lower rates, achieving longer ranges and higher reliability
- The streams arrive at the receivers in different quality. MIMO chooses the best stream available
- Paths in poor quality are thus eliminated and availability increased
Increased capacity and improved spectral efficiency
- Each radio (chain) carries the full OFDM channel capacity
- Both radios use the same 20MHz channel
- Thus doubled capacity per the same channel bandwidth
RW-2050-0150 Technical Specifications
| WM Item # | 204328 |
| Manufacturer | Radwin |
| Frequency | 5 GHz;5.8 GHz;5.4 GHz;5.2 GHz;2.4 GHz;4.9 GHz |
| Series | Radwin 2000L |
| Configuration | Configured via Radwin Manager Software |
| Radio Type | OFDM |
| Data Rate | 13 to 131Mbps |
| Receiver Sensitivity | -67 to -88 |
| Modulation | 64QAM, 16QAM, QPSK, BPSK |
| Security | AES 128bit Encryption |
| VPN | Support for Ethernet tagged frames (802.1q, 802.1p, and VPN) |
| POE | Proprietary POE system via IDU or IDU-C |
| Operating Modes | Point to Point |
| Antenna Alignment | Real-time RSSi (Signal to Noise) Signal Monitor for Antenna Alignment and Link Quality |
| Application | Outdoor backhaul, building to building bridge |
| Frequency Range | 2300 - 2500 MHz & 4940 - 5950 MHz |
| Mount Method | Includes mast mounts |
| Weatherproof | Ruggedized, Weatherproof, Outdoor |
| RF Connector | Integrated Antenna |
| Network Connector | 1 x 10/100 |
| Max Power | 25dBm Max |
| 3dB beamwidth, Azimuth | 8 Degrees |
| 3dB Beamwidth, Elevation | 8 Degrees |
| Antenna Type | Integrated 23 dbi Dual Poloarized Antenna |
-
Quick, Easy, Reliable Review by Answer Center America, Chicago
Value Installation Quality We purchased this product a few months ago and have been using it without issue since day one. Installation of the device was simple. Setup software easy. Connection speed and quality, perfect! . All our users are at one end of this wireless, all our servers & services are at the other side. We run VOIP, Web, Email, Remote Desktop, SQL Management Studio, Internal IM, Infinity Telephone Agent and Supervisor all across the wireless to the servers without any lag. We currently have 70 users/pcs at our peak time.
Weather has no affect on this device. Since it has been in production we have had, Snow, Heavy Rain, Sleet, Fog, High Winds, -20 degrees (w/o windchill) and the service has never faltered.
Write Your Own Review
You're reviewing: Radwin 2000 Quad-Band 100Mbps MIMO ODU, Integrated Antenna, End
You may also be interested in the following product(s)
Radwin 2000 Intergrated 100Mbps Wireless Bridge Kit - BYOFrom: $5,160.00 To: $6,714.00 |





