Check items to add to the cart or select all
You're currently on:
Cambium / Motorola WB3874AA PTP 54600 Series Lite, 5.4 GHz 150Mbps, Connectorized, Full Hop, NLOS
Product Description
This is your chance to beat your competition and jump head first into the first newly unlicensed band in years! This green frequecny means little to no RF interference, better performance and more reliable service.
The Motorola 600 Series point-to-point 5.4 GHz and 5.8 GHz wireless Ethernet bridges provide more range and capacity in near- and non-line-of-sight (NLoS) environments, delivering carrier-grade service (99.999% availability).
Motorola combines Multiple-Input Multiple-Output (MIMO) and Intelligent Orthogonal Frequency Division Multiplexing with advanced signal-processing algorithms, allowing 600 Series solutions to create four simultaneous signals between pairs of transceivers at each end of the link without losing spectrum efficiency. This technique increases signal integrity by an unprecedented 300 times.
Incorporated in Motorolas MOTOwi4 portfolio, PTP 600 Series bridges are available in several models to meet your specific requirements:
Connectorised Full: The Connectorised version of the PTP 600 Series bridge combines all the innovative technology found in the PTP 600 Integrated model with the extra advantage of external antennas. Over long distances and in extremely adverse environments, including deep non-lineof- sight, this solution lets you connect over greater distance and at a higher level of reliability and speed than comparable wireless bridges. (A list of approved antennas that meet FCC requirements is provided on Motorola' s web site at www.motorola.com/ptp.)
Connectorised Lite: With all the performance and reliability of the PTP 600 Series Connectorised system, this solution delivers up to 150 Mbps in extremely adverse environments at less cost. Then as bandwidth requirements grow, you can easily upgrade from 150 Mbps to 300 Mbps.
In non-line-of-sight environments, both Connectorised systems can increase link availability up to 99.999%. Prior to purchase, you can use Motorolas PTP Link Estimator to predict link reliability and throughput for your specific wireless application. 
Kit Includes:
- 2 x Outdoor Unit (ODU) - RF Unit
- 2 x Indoor Power Injector - PIDU PLUS
- 2 x Pole Mount Kit with Elevation/Azimuth Adjustment
*NOTE: 4 x ALPU-ORT Lightning Arrestors are required for every link.
WB3874AA Technical Specifications
| Original Sku | BP5530BHC15-2EE |
| WM Item # | 100912 |
| Manufacturer | Cambium / Motorola |
| Frequency | 5.4 GHz |
| Frequency | 5.4 GHz |
| Series | PTP 600 Series |
| Radio Power (max) | Varies with modulation mode and settings from 0 dBm to 25 dBm |
| Configuration | Web or SNMP using MIBII, WiMAX and private MIB |
| Radio Type | TDD (Time Division Duplex) |
| Data Rate | Dynamically variable modulation ranges from 7 Mbps to 150 Mbps |
| Receiver Sensitivity | Adaptive, varying between -96.5 dBm and -72 dBm according to modulation selected |
| Modulation | Dynamic; adapting between BPSK single and 256 QAM dual |
| Security | Proprietary scrambling mechanism; optional AES 128 and 256 Bit Encryption |
| VPN | Supported |
| POE | Included |
| Distance | non-LoS Up to 6 Miles (10Km),near-LoS up to 25 Miles (40Km),LoS Up to 124 Miles (200Km) |
| Operating Modes | Point to Point Bridge |
| Antenna Alignment | Audible antenna alignment alarm |
| Channel Bandwidth | 30MHz |
| Frequency Range | 5473 MHz 5725 MHz |
| Operating Tempature | 40 to +60 degrees C |
| Mount Method | Mast, Pole Mount |
| Wind Load | 150 Mph |
| Weatherproof | Outdoor, Rugged, Weatherproof |
| RF Connector | 2 x N-Female |
| Network Connector | 1 x 10/100/1000, 1 x T1/E1, 1 x 1000BaseSX (optional) |
Write Your Own Review
You're reviewing: PTP 54600 Series Lite, 5.4 GHz 150Mbps, Connectorized, Full Hop, NLOS
You may also be interested in the following product(s)
|
BYO PTP Wireless Connectorised Bridge KitFrom: $248.02 To: $18,494.44 |
Product Tags
Other people marked this product with these tags:
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
