Build your own Motorola PTP wireless bridge kit with integrated antenna.

Choose anything from the the PTP300 to the PTP600 with speeds form 25Mbps all the way up to 300Mbps!

Then select a pre-determined set of accessories and make sure you have everything you need to make your link work.

Here is what is already included in the kit:

• 2 x Outdoor Unit (ODU) - RF Unit
• 2 x Indoor Power Injector - PIDU PLUS
• 2 x Pole Mount Kit with Elevation/Azimuth Adjustment

Establish Robust, High-Speed Links to Challenging Locations
Operating in the 5.4 and 5.8 GHz unlicensed bands at data rates up to 300 Mbps, the Motorola wi4 Fixed Point-to-Point (PTP) 300, 500 and 600 Series Wireless Ethernet Bridges are designed to reliably transport your data, voice and video communications in virtually any environment non-line-of-sight, high-interference and long-range line-of-sight paths, over water and open terrain, even in extreme weather conditions. Through Motorola's unique combination of technologies, PTP 300, PTP 500 and PTP 600 solutions greatly enhance link performance in a variety of applications, including building-to-building connectivity, voice-over-IP, video surveillance, telemedicine, disaster recovery, emergency services and high-speed backhaul.

More Range to Anywhere
PTP 300, PTP 500 and PTP 600 Series links have class-leading sensitivity and power output, which enable the links to go farther than comparable systems up to 155 miles (250 km). Plus, Motorola combines MIMO, i-OFDM and our advanced signal-processing algorithms to create four simultaneous channels between pairs of transceivers at each end of the link, without losing spectrum efficiency.



Choice and Flexibility
PTP 500 Series bridges are available in several models to meet your individual requirements Integrated and Connectorised but in this kit we will focus on the Integrated Bridge Kit:

5.4 and 5.8 GHz Integrated Bridges: Designed to provide the high-performance capabilities, at a range of costs to meet your budget. With up to 300 Mbps Ethernet data rate and a built-in antenna, the PTP300, PTP500 and PTP600 Integrated system is the perfect choice for any environment near- or non-line-of-sight, line-of-sight and high-interference environments where high throughput is a major requirement and/or dual E1/T1 (only PTP600) capability is needed.

Integrated Lightning Protection on PTP 300 and PTP 500
PTP 300 and PTP 500 Series bridges provide built-in lightning protection capability, eliminating the need to deploy an external lightning protection device on a tower or wall adjacent to the radio. The lightning protection built into the PTP 300 and PTP 500 radio contains all the protection required at the top of the tower or wall. An external PTP Lightning Protection Unit (PTP-LPU) is required near the base of the tower or wall at the cable entrance point leading to the network.

Together the lightning protection capability built into the PTP 300 and 500 radio and the external PTP-LPU or ALPU-1000-BT-R offer exceptional protection from the harmful effects of lightning. However, 100% protection is neither implied nor possible.

Reassuring, Robust Security
With Motorolas unique software, each PTP wireless bridge will communicate only with its user-configured counterpart at the other end of the link and with no other. In addition, communications are encoded using a unique scrambling mechanism to secure over-the-air transmissions. Another layer of security can be applied with FIPS-197 compliant 128- and 256-bit AES encryption (optional).