MTC, Outdoor GigE POE Surge Supressor, 800-GigE-POE
Wireless Beehive
$59.95
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 10 - 100 and pay only $53.75 each
Outdoor GigE Ethernet surge suppressor - protector with midspan POE insert/extract. Configuration via jumper plugs allow any combination of polarity and pair use with up to 1.25 amps per pair. If all 8 wires are configured as the same polarity, 5 amps can be conveyed. This device will power 802.3af/at devices or extract power from a POE powered circuit. This device is also designed to protect GigE over copper equipment in an outdoor environment. Shielded RJ45 jacks provide grounds to shielded plugs.
Features
- GigE Ethernet surge suppression design with low clamp voltages
- Shielded RJ45 connectors provide a ground to shielded plugs
- Ultra fast suppression - typically less than 1.0ps from 0 Volts to BV min
- Faster acting than Thyristor and Gas Tube only designs
- Lower loss and crosstalk than Thyristor based designs
- Ethernet CRC error correction circuit
- Tool-less entry
- Cover is hinged
- Dust tight
- Back knockout feature for concealing wires
- Ultra fast suppression - typically less than 1.0ps from 0 Volts to BV min
- Up to 1.25 amp per pair POE capability
- Any polarity on any pair - total flexibility
Applications
- Backhaul radios
- Point to point microwave radio powering
- Installed at outdoor tower colocation sites
- Conveying power over unused Cat5/6 cables
- Emergency spare POE
- Pulling power from POE circuits
- Powering Cameras
- Up to 68 volts AC or DC
- Note: Does not allow "split pair" powering for devices like Canopy PMP430, or direc DC-powered devices like PMP100.